所有者:TerryWang(呢称); 发布时间:2017-04-12 14:30:16; 更新时间:2023-05-14 20:44:07
阅读所需积分:0;
简介:发格绝对光栅尺在西门子系统中的参数设置SAS/GAS/LAS
1.配置 SAS/GAS系列光栅尺
数控 CNC中的设置
MD 30200 NUM_ENCS = 2
MD 30240 ENC_TYPE = 4
MD 31000 ENC_IS_LINEAR = 1
MD 31010 ENC_GRID_POINT_DIST = 0.02 ( look P 407= 20000 )
MD 31040 ENC_IS_DIRECT = 1
MD 34200 ENC_REFP_MODE = 0
IBN tools 截图(不适用于828D sl)软件设置内容
840D sl实拍
Encoder type = linear ( Abs SSI protocol & sin/cos )
Power supply = 5V
Encoder connect = X520
SSI Protocol
Gray code
Res/bit / 100nm
Baurate = 100 kHz
Pos. Length in bits = 25 bits
Bits in fr. of pos. = 0 bits
Bits behins pos. = 1 bit
Parity bit position = yes
Starter(适用于828Dsl, 802Dsl, 840Dsl)软件设置内容:
Code: Gray
Resolution: 100 ZM (nm)
Band rate: 100 KHz
Position Length: 25
Bit behind pos: 1
Parity bit 25
Grid Line: 20000 ZM (nm)
数控 CNC 中的参数
MD 30200 NUM_ENCS = 2
MD 30240 ENC_TYPE = 4
MD 31000 ENC_IS_LINEAR = 1
MD 31010 ENC_GRID_POINT_DIST = 0.04 ( look P 407= 40000 )
MD 31040 ENC_IS_DIRECT = 1
MD 34200 ENC_REFP_MODE = 0
IBN tools(不适用于828D sl) 软件设置内容
Encoder type = linear ( Abs SSI protocol & sin/cos )
Power supply = 5V
Encoder connect = X520
SSI Protocol
Gray code
Res/bit / 1000 nm
Baurate = 100 kHz
Pos. Length in bits = 27 bits
Bits in fr. of pos. = 0 bits
Bits behins pos. = 1 bit
Parity bit position = yes
Starter(适用于828Dsl, 802Dsl, 840Dsl)软件设置内容:
Code: Gray
Resolution: 1000 ZM (nm)
Band rate: 100 KHz
Position Length: 27
Bit behind pos: 1
Parity bit 27, ODD
Grid Line: 40000 ZM (nm)